Project insight

Sunrun in 2025: A Quality Inspector Answers the Questions Homeowners Actually Ask

A brand-compliance reviewer who inspects roughly 200 residential solar installs a year answers the real questions about Sunrun leases, 2025 energy credits, 2024 reviews, inverter choices, and the one clause nobody bothers to verify.

I've reviewed roughly 200 residential solar installs a year for the past four years—contracts, spec sheets, final inspections. About a third pass through our verification queue on a Sunrun lease or PPA. So I've seen the documents up close, and I've seen what happens when people skip a step. Here are the questions homeowners actually ask me, in the order they tend to ask them.

What should I check before signing a Sunrun lease?

Three things, and they're all on the same page—the "Term and Payment" section.

First, the escalator. Sunrun offers 0%, 1.9%, and 2.9% annual escalators depending on product and market. That 2.9% compounds. A $100 payment today hits about $195 by year 25. People see 1.9% and think "that's basically nothing." It isn't—over 25 years, it's the difference between a lease that tracks inflation and one that outruns it.

Second, the transfer clause. Most Sunrun leases transfer on home sale, but "transfer" isn't "assume." The buyer has to qualify. If they don't, you're buying out or staying on the hook.

Third, the buyout formula. It's usually a per-kWh rate baked into your contract, not the fair market value of the panels on your roof. Those two numbers drift apart fast.

Here's my overconfidence fail from 2022: I knew I should get transfer terms in writing on a partner deal, but thought "we've worked together for years, what are the odds?" That was the one time the verbal agreement got forgotten. $18,000 of escalated cost landed on a closing statement. Now every contract review includes a written transfer clause confirmation, no exceptions (I really should add the same check to our commercial side).

How do Sunrun solar energy credits work in 2025?

This is where most of the confusion lives, and it's not Sunrun's fault—it's the utility's.

"Solar energy credits" is a catch-all for two different things. One is net metering (the utility crediting you for exported kWh). The other is SRECs (Renewable Energy Certificates, sold in some markets). Sunrun lease language usually assigns SREC rights to Sunrun—check your contract. Net metering rules shifted in 2025 for several states; California's NEM 3.0 is the big one, with export credits at roughly 25% of prior rates.

Practical move: ask for a bill projection with credits broken out line by line. If the rep can't show you the utility's current rate schedule, that's a flag. Per FTC Green Guides (16 CFR Part 260), environmental claims—including "100% clean energy"—need substantiation. I apply the same logic to every credit projection I see: if the number isn't sourced, it's not a number.

Sunrun solar company review 2024 — what do the bad ones actually say?

I read a lot of these. The pattern is consistent.

1-star reviews cluster around two themes: install scheduling (weeks of "any day now" texts) and post-install service calls. 5-star reviews cluster around sales and the app. Neither cluster tells you much about installation quality.

So when I'm doing due diligence on any installer, I filter for specific complaints: inverter brand mentioned, roof condition at install, timeline gaps. A review that says "the panels look good but they used a SolarEdge inverter when I was quoted Enphase" is worth 50 "great company!" reviews.

To be fair, some negative reviews are about things the installer can't control—utility interconnection delays in 2024 were brutal in several markets. Granted, that's not Sunrun's fault. But it does show up in their NPS, and it's worth knowing before you sign a 25-year agreement.

Solar microinverter vs string inverter — which holds up better?

This is the question I wish more homeowners asked. It's a bigger decision than panel brand.

Microinverters (like Enphase IQ8) sit under each panel, run panel-level MPPT, and give you panel-level monitoring. String inverters (like SolarEdge, or the base string units on simpler roofs) cost less, have one point of failure, but sit in one spot where service is easy.

From a quality standpoint: micros tolerate shade better, and you don't lose the whole array if one fails. Strings win on upfront cost and—in my experience—on long-term efficiency on a clean, unshaded south-facing roof.

Sunrun's standard install in my region uses string inverters with optimizers. That's fine on a clean roof. Personally, on a roof with any tree shade or multiple orientations, I'd push for micros. It'll probably add 10–20% to the equipment line.

How long are wind turbine blades — and does it matter for my solar quote?

Not really, but I get asked enough that it deserves an answer.

Modern onshore turbine blades run 50–80 meters (roughly 165–260 feet). Offshore blades clear 100 meters—longer than a 737's wingspan. People solar-shopping ask this because they assume bigger = better for residential too. A single 15 MW offshore turbine covers about 10,000 homes. Your rooftop system, at 6–8 kW, offsets one house. Both are efficient—at completely different scales.

Where I'll take a side: utility-scale wind and solar are the cheapest electricity on the grid today. Residential solar is efficient at the retail-rate offset level, not at the utility-generation level. Those are different markets, different math, and it's worth being honest about which one you're buying into.

Is a home battery just a giant carry-on lithium battery?

Kind of—and the comparison is more useful than it sounds.

TSA caps carry-on lithium batteries at 100 Wh (up to 160 Wh with airline approval). A Sunrun Brightbox runs around 16 kWh, so roughly 160,000 Wh. That's about 1,000 times a laptop-size carry-on battery.

But here's the part that matters: size doesn't determine safety. Chemistry and the battery management system do. UL 9540 and UL 9540A are the two stamps to look for on any home battery. 9540A is the fire propagation test—the one that tells you what actually happens when a cell fails.

I see spec sheets that list UL 9540 without 9540A. Not a dealbreaker on its own, but it's a checklist item I never skip.

What's the one clause I'd verify that nobody checks?

The equipment list. Specifically, "or equivalent" language.

It took me about four years and 800 contract reviews to understand that most install problems start as contract-language problems—not installation problems. The crew shows up and installs exactly what the paperwork allows. If the paperwork allows "or equivalent," they will use the cheaper equivalent.

In 2022, our team didn't have a formal spec-sheet verification step. A batch of 30 panels arrived with a different optimiser model than the contract listed—"equivalent" per the vendor, not equivalent per the customer's quote. That quality issue cost us a $22,000 redo and pushed a launch by six weeks. The third time a spec mismatch happened, I finally built a verification checklist into our approval flow. Should have done it after the first one.

"Or equivalent" is fine in a commodity contract. On a $30,000 residential solar system, it's the loophole that decides which inverter ends up on your roof. Make them write the model number. Then check that it matches on install day.